Many types of goods - for example, pipes, construction materials or metal sheeting - are often quite long, and impossible to fit neatly onto a 1,200 by 800mm pallet. These loads can be difficult to get down warehouse aisles, even if they aren't particularly narrow.
Cantilever racking, solves the storage problem - this kind of racking is open-fronted, meaning there are no vertical bars to block the placement or removal of long goods.
But when you need to move these goods down an aisle, how do you get around the space problem? The simplest and most versatile solution is - with a multi-directional truck.
When a typical reach truck removes a pallet from a rack, it drives to the pallet position, reaches up for the pallet, brings it back down, and then turns 90 degrees to drive out of the aisle and transport the pallet to where it needs to be.
With a regular pallet, this operation is no problem. But if you're handling something which is longer than the width of the aisle, turning to exit simply won't work. A multi-directional truck solves this problem. Rather than the entire truck turning when the pallet is retrieved, the wheels rotate - allowing the truck to move down the aisle 'sideways', keeping the load in the same orientation as it was on the rack. Once it reaches more open space at the end of the aisle, the truck can turn and handle just like any other.
When not being used for long loads, a multi-directional truck can operate in just the same way as a conventional reach truck. But if you handle a variety of goods in different shapes and sizes in your warehouse, a multi-directional reach truck would give you flexibility.
One company which uses these trucks to their full capabilities is Johnson Controls, the world’s largest fire and security company, based in the Hertfordshire town of Letchworth.
Their long goods are housed in special cantilever racks, so multi-directional trucks are a necessity when working in their narrow aisles. The TERGO® UFW reach truck can transport long loads safely
and reliably, thanks to their hydraulically adjustable fork widths. These trucks can also be driven in all directions, a decisive advantage since the aisles in the Johnson Controls long goods storage area are
no wider than those in the rest of the warehouse.
“Thanks to the UniCarriers solution, we have been able to consolidate material flows considerably in comparison to our previous warehouse,” affirms Neil McCarthy, QA/EHS & Facilities Lead UK&I at Johnson Controls. “Using forklifts able to place and remove goods at heights of up to 6 m has allowed us to reduce the number of warehouse aisles to eleven and improve warehouse efficiency.”
To learn more about how Johnson Controls uses multi-directional trucks in its operation, view our full case study on the company. And if you want to learn more about UniCarriers' own multi-direction reach truck, the TERGO® UFW, click the blue button below to order a brochure.